«
»

How do I hang Hanging baskets?


My wall is like granite brick, and ive tried drilling in between the bricks, but one block is in the way! The masonary drill bit just broke on me when it was half way in! Any suggestions??

a masonary drill should work

This entry was posted on Sunday, April 11th, 2010 at 6:12 pm and is filed under hanging baskets. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

10 Responses to “How do I hang Hanging baskets?”

  1. usually hooks work well. Especially the ones with the stickystuff on the back.
    References :

  2. zanydumplings on April 12th, 2010 at 1:35 am

    If your wall is too tough have you thought of putting poles into the ground and then try hanging them. good luck
    References :

  3. I don’t know either so I’ve starred your question.

    Previous attempts at gaining the knowledge have been fast and too vague. Hope someone brings a useful answer to this. :)
    References :

  4. You need a new masonry bit. Get a spray bottle and fill it with plain water. While drilling has some one spray the water on the bit. This will lubricate the bit and prevent it from breaking again.
    References :

  5. Hanging baskets are HEAVY when filled and watered. You will need to try again with the drilling. If you have problems with drill/bit/wallplugs, surely you have a neighbour/friendly plumber/builder who could drill the wall for you. A good wall mounted bracket can stay in position forever.
    References :

  6. If the bit is sticking out at all tighten your drill chuck back on to it an reverse the drill to back it out.If your breaking masonary bits there probably not a very good quality.Try using a titanium bit they usally cut threw most anything.If its to far in the wall the make whats called an easy out.First you have to drill a smaller hole into the end of the broken bit with a smaller titanium bit.The easy out will drive in like a nail into the hole.it has a square head so you can get a wrench on it.turn it counter clokwise to remove it.If you get the old bit out use a titanium bit to finish the job.Just don’t get into a hurry let the drill do the work.Most of the time when bits are broken its because you try to force them.Good Luck
    References :

  7. First of all are they guilty?
    Who tried them?
    was it a judge and jury or magisrate?

    Ir the answr is Yes to any of the above.

    Get a rope, tie a nose, put rope round basket,put basket on a chair, tie rope to a high point, them kick thr chair away.

    The basket will then be hung and become a hanging basket.
    References :

  8. go to your local builders yard (not b&q etc..) and tell them your problem they,ll have a drill bit for you
    References :

  9. sound like you need a diamond tip bit.or if you like you can use a epoxy glue once that’s on it will never come off.
    References :

  10. a masonary drill should work
    References :

Leave a Reply